These are navigation links to move inside this page.
Go to Global Navigation
Go to Primary Contents
Go to Site Information
Global Navigation
Primary contents
FAQ
Is Noise Reduction function available?
Yes, it is. Noise reduction is applied to long exposures. (max. 30 seconds) This function can be disabled.
Did the answer help you?
Please help us to improve our FAQ-System by clicking one of the Feedback-Buttons below.
Answer too technical
Answer too short
Answer not up to date
Back to Searchresult
Related FAQs
Questions about image results
Can I use the camera for infra-red photography?
Can you give recommendations for playing back digital images on a flat screen TV (LCD/Plasma)?
Does the AS work with lenses mounted via M42 or T2 adaptor?
For what kind of subject is the Anti-shake function especially useful ?
How can I eliminate redeye in flash pictures taken with my Dynax camera?
How do I use spot-metering in my camera?
How do I use the Ps and Pa function of my Dynax camera?
How fine is the effect of Anti-Shake function?
If the sensitivity is raised, does anything effect the quality of image?
Images are underexposed when using the Program Flash 5600HS(D) or 3600HS(D), compared to when built-in flash is used (Dynax 7D). Can you change this?
Images became noisy after increasing the camera sensitivity.
In Anti-Shake mode, what is the maximum shutter speed with hand-held shooting?
In spite of using flash, the captured image seems underexposed.
Is Anti-shake system effective when using macro lenses?
Is Noise Reduction function available?
Overexposure when using the program flash 5600HS(D) or 3600 HS(D) with the Dynax 7D/5D as bounced flash.
The captured images cannot be played back in the camera.
The extension of the recorded images become "*JPE"
The extension of the recorded images become \"*JPE\"
The file size of the recorded images is smaller than it should be.
The recorded images by RAW cannot be printed.
The recorded images set to "Embedded Adobe RGB" -Color Mode cannot be printed/opened by the application software.
Under which conditions can the effect of Anti-Shake decrease?
Using colour filters on a digital camera the images do not show the desired effect
Vignetting occurs in the lower part of the image.
What are the benefits of using Adobe RGB color space?.
What are the Minolta Portrayer filters?
What causes Red Eye when taking flash pictures?
What does the new “D” technology do for my Dynax camera?
What equipment do I need to view the RAW file captured with the camera.
What happens to image quality if I manually select a specific sensitivity setting?
What happens when taking panning shot with Anti-shake ON?
What is a RAW file?
What is high-speed flash sync?
What is JPEG?
What is the sync-speed in wireless mode?
What is the Zone Matching function?
What is to consider when sing the flash sync. terminal (PC-Sync)?
What optional accessories are newly added for Dynax 7D?
What should be done if dust has attached onto the CCD?
When using an image editing program (e.g. Photoshop) the pictures of the DiMAGE cameras are shown with an image resolution of 72dpi.
When using an very old lens, all pictures are overexposed.
Why does my system flash unit display a shorter focal length than I choose with the digital camera's zoom?
Why is only the subject of my picture sharp and the background is not?
Why should the anti-shake compensation not be used when the camera is on the tripod? (Mentioned in the instruction manual)
Local Navigation
Site Information