These are navigation links to move inside this page.

 | Global Site

Global Navigation

Primary contents


My camera does not recognise a CompactFlash card.

1) The CompactFlash card may have ever been formatted with other DSC . Some DSCs format the card in their unique method that the DiMAGE cannot read. Reformat the card physically on a PC. 2) The DiMAGE camera is designed to check the capacity when a card is inserted. In case it finds any problem in the capacity data, the camera will not accept the card. Usually this occurs if the card has been used repeatedly and may have a part of information destroyed. The DiMAGE cannot read the card if it has been initialized on some DCSs that executes a unique partition management. (The card is recognised the same as above.) Performing physical formatting using a PC or some DSC capable of the function may solve the problem, but the optimized segmentation enabling quick access will be lost at the same time. The DiMAGE camera can format the card only logically to maintain the optimized segmentation originally provided. http://www.konicaminoltasupport.com (Compatibility) Also check if a pin in the card slot is bent. Then the camera has to be sent to service.

Did the answer help you?
Please help us to improve our FAQ-System by clicking one of the Feedback-Buttons below.

Answer too technical
Answer too short
Answer not up to date
Related FAQs

Local Navigation

Back to top

Site Information

Imprint | Terms of use
© Copyright 2007 Konica Minolta Holdings, Inc. All rights reserved.