KONICA MINOLTA EUROPE
SUPPORT | EUROPE

Global Navigation


HomeProducts > Digital SLR Cameras > Dynax 7D > Accessory > Further infos about other Program Flash Accessories 

Primary contents

STANDARD ACCESSORY
  • Dynax 7D Body (no. 2181-101)
  • Remote Code Clip (no. 8771-500)
  • Wide Strap WS-4 (no. 6181-710)
  • Eyepiece Cap II (no. 8235-200)
  • Eyepiece Cup EC-1400 (no. 8237-200)
  • Video Cable VC-500 (no. 7181-820)
  • USB Cable USB-2 (no. 7733-220)
  • Lithium ion battery NP-400 (no. 8699-330)
  • Lithium ionen battery charger BC-400 (no. 8700-160)
  • LCD Monitor Protect Panel MPP-1000 (no. 6181-910)
  • Accessory Shoe Cap SC-1000 (no. 6806-600)
  • Body Cap BDC-1000 (no. 7396-500)
  • DiMAGE Software CD-ROM (J/E/F/G/S/C Versions)
  • Installation Guide 10 languages
  • Hardware Owner Manual ( 1 language each)
Other Program Flash Accessories
External Battery Pack EP-2 (no. 8841-701)

The ultra-compact and portable external battery pack plugs into the Program Flash 5600HS(D). The unit requires the use of 6 AA size batteries.

Bounce Reflector V set (no. 8841-927)

This compact accessory can be attached to the previously mentioned Program Flashes and provides a desirable bounce surface for a soft, natural effect, even outdoors. Minolta direct TTL autoflash metering controls flash duration for proper exposure.

The Bounce Reflector V can be folded together, transported easily, and be attached to the flash within seconds.

Off-Camera Cable OC-1100 (no. 8825-600)

Used in combination with the off-camera shoe OS-1100 to use the Program Flash 3600HS(D) removed from the camera body, or can be used by itself to connect the Program Flash 5600HS(D) directly to the camera. As the flash can be positioned at any angle to the subject, special lighting effects, close-up photography, and precise control of the lighting balance are possible.

The coiled spiral cable allows a working distance between the flash and the camera of up to one metre.

Cable CD (no. 8808-140)

A cable between flashes to enable use of multiple flash units. The coiled spiral cable allows a working distance between the flash and the camera of up to one metre.

To connect the OC-1100 to the 3600 HS (D), you will also need the Off-Camera Shoe OS-1100.

Extension Cable EX (no. 8808-130)

This cable is not only for connecting the program flashes to the TC-1000, but may also be used as an extension for OC-1100 and as connection to the cable CD.

The coiled spiral cable allows a working distance between the flash and the camera of up to one metre. Up to 5 extension cable EX’s can be connected together.

Off-Camera Shoe OS-1100 (no. 8825-610)

To use Program Flashes off the camera, mount the flash on the OS-1100 and

connect the flash and camera with the off-camera cable OC-1100. Features a tripod socket on the underside to allow secure positioning and lighting arrangements.

Triple Connector TC-1000 (no. 8821-120)

A multiple flash connecting accessory to link up to three Program Flashes to the camera.

The Program Flash 3600HS(D) is connected to the TC-1000 with a OS-1100 off-camera shoe and an extension cable EX. The 5600HS(D) is directly connected with an extension cable.


Local Navigation

Back to top

Site Information

Imprint | Terms of use
© Copyright 2007 Konica Minolta Holdings, Inc. All rights reserved.