KONICA MINOLTA EUROPE

These are navigation links to move inside this page.


 | Global Site

Global Navigation



Primary contents

FAQ

Can I use the flash at all shutter speeds?


Yes, it does, but it may be underexposure at the high shutter speed range. (Exposure time is shorter than flashing, therefore it is difficult to get enough light.) The following shutter speed is as a standard maximum speed: Built-in flash: 1/1000 sec. External Flash: lower than 1/250 sec. *For daylight sync. , flash can be used in higher shutter speed. *For studio Flash via PCT-100, please set the shutter speed lower than flash recommended value. If flash does not recommend any shutter speed, please set lower than 1/125 sec.(Some flash may be delay to fire.)


Did the answer help you?
Please help us to improve our FAQ-System by clicking one of the Feedback-Buttons below.


Answer too technical
Answer too short
Answer not up to date
Related FAQs

Local Navigation

Back to top

Site Information

Imprint | Terms of use
© Copyright 2007 Konica Minolta Holdings, Inc. All rights reserved.