QuickScan 35
The latest release of driver software
Windows :Ver.2.6  
Macintosh :Ver.2.6  
  :Ver.2.6 [Dedicated driver software
  for New Power Macintosh G3 series (Blue&White)]
PC Windows IBM PC/AT compatible with an 80486SX-25MHz processor or higher.
Macintosh Apple Macintosh with 68030-25MHz processor or PowerPC.
OS Windows Windows 3.1
Windows 95(inc. OSR2)
Windows 98
Windows 98 Second Edition

Limited Support OS:
Windows Me
(*6)Windows 2000 Professional
(*6)Windows XP Home Edition
(*6)Windows XP Professional

Product has been tested and is confirmed to work correctly with a limited number of system configurations and/or devices.
See the footnote.
Macintosh Macintosh/
Power Macintosh/ Power Macintosh G3
System 7.5 to Mac OS 8.5.1

Limited Support OS:
Mac OS 9.0/9.1/9.2.1/9.2.2
Product has been tested and is confirmed to work correctly with a limited number of system configurations and/or devices.
New Power Macintosh G3 (Blue&White)/ Power Mac G4
(*1)
Mac OS 8.5.1 to Mac OS 8.6

Limited Support OS:
Mac OS 9/9.1/9.2.1/9.2.2
Product has been tested and is confirmed to work correctly with a limited number of system configurations and/or devices.
Recommended SCSI board Windows
Adaptec, Inc.:
  (*2,*5)AHA-1510B
(*2,*5)AHA-1520B
AHA-1540CP
(*3,*5)AHA-2910B
(*3,*5)AHA-2920C
(*3,*5)AHA-2940
(*3,*4,*5)AHA-2940AU
(*3,*5)AHA-2940U
(*2,*5)AHA-2940UW
AVA-1505E
AVA-1505AE
Macintosh Macintosh/ Power Macintosh/ Power Macintosh G3 Standard built-in SCSI host adapter (Types that connect to an expansion board inserted in the PCI bus, NuBus can't be used.)
New Power Macintosh G3 (Blue&White)/ Power Mac G4
(*1)
Adaptec, Inc.:
  PowerDomain 2940UW
PowerDomain 2940U2W
PowerDomain 2930U
SCSI Card 2906
Tested SCSI board Windows
Adaptec, Inc.:
  SCSI Card 2930U
SCSI Card 2930U2
(*4)SCSI Card 19160
(*4)SCSI Card 29160
(*4)SCSI Card 29160N
Macintosh New Power Macintosh G3 (Blue&White)/ Power Mac G4
(*1)
Adaptec, Inc.:
  PowerDomain 29160N
Tested Application Application Remarks
Windows
Adobe Photoshop 3.0.5  
Adobe Photoshop 4.0.1  
Adobe Photoshop 5.0.2  
Adobe Photoshop 5.5  
Adobe Photoshop 6.0  
Adobe Photoshop 7.0  
Paint Shop Pro 5.0  
Corel PHOTO-PAINT 7  
Adobe PhotoDeluxe 1.0  
Adobe PhotoDeluxe 2.0  
Corel DRAW 7  
Corel DRAW 8  
Picture It! 1.0  
Macintosh
Adobe Photoshop 3.0.5  
Adobe Photoshop 4.0.1  
Adobe Photoshop 5.0.2  
Adobe Photoshop 5.5  
Adobe Photoshop 6.0 -See the foot note.
Adobe PhotoDeluxe 1.0  
Adobe PhotoDeluxe 2.0  
<Notes on Adobe Photoshop 6.0 for Macintosh>
  The following symptoms are known to occur at image acquisition to Adobe Photoshop 6.0 for Macintosh.
Symptom-1
The scan settings for preferences and image correction are initialized when restarting the driver software.
Symptom-2
A pre-view image appears with its sides reversed (right-left) accompanied by color misalignment when restarting the driver software after scanning the image with the auto brightness ON (color positive).
Corrective method
Perform the preview scan again.
<Notes on Adobe Photoshop 7.0 for Macintosh>
  QuickScan35 Plug-in driver cannot be used with Adobe Photoshop 7.0 for Macintosh.
*1: A dedicated edition of driver software version 2.6 is necessary to use the scanner on new Power Macintosh G3 series (Blue & White).
*2,*3: Fully tested with Windows 2000 Professional with a limited number of system configurations and/or devices.
(*2:If ASPI layer is Ver.4.57, it is usable.)
*4: When the scanner is connected via AHA-2940AU, SCSI Card 19160, SCSI Card 29160 or SCSI Card 29160N, your computer will take longer time by one or two minutes than usual to start up. You can use the scanner normally after a message Device connected, but not ready appears.
*5: Product has been tested and confirmed to work correctly under Windows XP with a limited number of system configurations and/or devices.
*6: You must first log on as the Administrator to complete the driver installation.
 
<Notes on Windows 2000 Professional.>
  1. First time when using the scanner on the PC, follow the procedure below.
1) Connect the scanner to the PC. Found-New-Hardware-Wizard runs automatically.
2) Click on Next button several times until the last window appears.
3) Check Disable the device and click on Finish.
2. Driver installation 
You must be logged on as an administrator to complete the installation.

Contact the manufacturer of adapters or applications for the latest compatibility information.

- Apple, Macintosh, Power Macintosh, New Power Macintosh G3, Power Mac G4 and Mac OS are trademarks or registered trademarks of Apple Computer Inc.
- Windows is a registered trademark in the United States and other countries of Microsoft Corporation.
- Adobe and Photoshop are registered trademarks of Adobe Systems Incorporated.
- All Other brand and product names are trademarks or registered trademarks of their respective owners.

(January 23, 2004)