| Flash compatibility for Dynax 7D/5D |
Function Program Flash 5600 HS(D) Program Flash 3600 HS(D) Program Flash 2500 (D) Macro Ring Flash 12002
Macro Twin Flash 2400
(needs Macro Flash Controler)
Flash metering Yes Yes Yes Yes
ADI-metering Yes Yes Yes N/A
Flash burst
(manual control*)		 Yes*
(Yes)		 Yes
(No)		 Yes
(No) 		Yes
(Yes)
Autozoom Yes** Yes** N/A N/A
Flash range Display
(on the flash)		 Yes N/A N/A Yes
Manual Zoom Yes Yes N/A N/A
High-Speed Sync Yes Yes N/A N/A
Slow Sync Yes Yes Yes Yes
Wireless Flash Yes
 Yes N/A
 N/A
Wireless High-Speed Sync Yes Yes N/A N/A
Modelling Flash Yes N/A N/A Yes (for Twin Flash 2400 only)
Multiple Flash Yes N/A N/A N/A
AF Illuminator Yes Yes Yes No (for Ring Flash: Lamp is used as AF illuminator)
 

Notes:
Older Minolta Flashes can be mounted on the camera but they have only a full output (or use the manual setting for flash-output if availbale) and no flash metering.

Other manufactures´ flash units should not be used, because they may damage the camera body and operation is not guaranteed.

Automatic metering is possible even when multiple flash units (only D units) are used with an off-camera accessory. However, it isn´t possible to take a shot with multiple flash units if any flash unit is OFF or if new and old models are used together.

 

* Possible to release studio flashes without a cable connection (proper use only with flashes, which can perform a manual control)

** The zoom position shows at the slightly smaller focal length than attached to the 35 mm film SLR camera.

N/A = not available